Tape Light - Nora Lighting

NARGBW-710W-M

kevin.solano — Wed, 02 Jul 2025 16:11:29 +0000

The 12" controller quick connect allows for easy connection to any CCT controller with NARGB-710W.

Compatible CCT Controllers:
NACCT-868: CCT Touch Pad Wall Controller
NATL-875: RGBW & CCT Controller for Tape Light

Compatible Quick Connect:
NARGB-710W: 12" Power Line Interconnector

The post NARGBW-710W-M first appeared on Nora Lighting.

NATL-877

kevin.solano — Tue, 05 Nov 2024 18:20:50 +0000

Used to program RGBW or CCT tape light to certain color configurations. The remote can be used up to 90' from controller, must be in direct view. It can be used to control four controllers simultaneously

Compatible Controller:
NATL-875: RGBW & CCT Controller

Key Selections: Brightness, colors, color changing - flash, strobe, fade and smooth fade, on/off

Batteries: 2 x AAA (not included)

The post NATL-877 first appeared on Nora Lighting.

NATL-875

kevin.solano — Tue, 05 Nov 2024 18:17:50 +0000

RF Controller is required for RGBW LED Tape Light or CCT LED Tape Light. Installs between the driver and the power line interconnector. The controller can be used to toggle between colors or changing modes. Requires RGBW or CCT Hand Held Remote (ordered separately)

Compatible Hand Held Remote:
NATL-877: Hand Held Remote for RGBW & Selectable CCT

Compatible Tape Lights:
NUTPCOB-RGBW: 24V RGBW LED Tape Light
NUTP10: 24V CCT Color Tuning LED Tape Light

The post NATL-875 first appeared on Nora Lighting.

NATLCB-TB707

kevin.solano — Mon, 04 Nov 2024 20:21:31 +0000

The terminal block connects two COB LED tape lights end-to-end.

Compatible Tape Light:
NUTP14: 24V COB High Output LED Tape Light (450lm/ft.)
NUTP15: 24V COB Standard Output LED Tape Light (210lm/ft.)

The post NATLCB-TB707 first appeared on Nora Lighting.

NATLCB-TB

kevin.solano — Mon, 04 Nov 2024 20:14:19 +0000

The terminal block connects the COB LED tape light to (2) wires (18AWG max.). Can be used as a power feed or jumper.

Compatible Tape Light:
NUTP14: 24V COB High Output LED Tape Light (450lm/ft.)
NUTP15: 24V COB Standard Output LED Tape Light (210lm/ft.)

The post NATLCB-TB first appeared on Nora Lighting.

NATLCB-TB/60

kevin.solano — Mon, 04 Nov 2024 19:42:09 +0000

The terminal block connects the COB LED tape light to (2) 60" 18AWG wires. Can be used as a power feed or jumper.

Cable Length: 60"

Compatible Tape Light:
NUTP14: 24V COB High Output LED Tape Light (450lm/ft.)
NUTP15: 24V COB Standard Output LED Tape Light (210lm/ft.)

The post NATLCB-TB/60 first appeared on Nora Lighting.

NUTP15

kevin.solano — Mon, 04 Nov 2024 17:21:56 +0000

24V COB LED Tape creates a uniform seamless line of light without additional diffused covers or accessories. Producing over 450 lumens per foot in dedicated color temperatures, tape light is a perfect solution for low clearance or reflective surfaces to eliminate all glare or dotting.

Features
· 24V system - required Class 2 LED driver
· Seamless COB eliminates LED dotting
· Field cuttable every 1.79" and connectable with accessories
· Roll includes: Tape light, power feed with DC connector, mounting clips and screws
· Easy to install with pre-applied adhesive tape or clips
· Compatible with NEXUS (Driver/Dimmer All-in-One)
· cULus Listed for indoor dry locations (IP20 rated)

Length: 16.4' or 100' (40' maximum run length)

Input Voltage: 24V

Lumens / Wattage: 210lm / 2.4W per foot
(Also available in 450lm / 4.5W per foot, Click Here for more information)

Color Temperature: 2700K, 3000K, 3500K or 4000K

Color Rendering Index: 90+ CRI

Accessories:
NATLCB-TB: Terminal Block for Tape-to-Wire
NATLCB-TB/60: Terminal Block for Tape-to-Wire with 60" Cord
NATLCB-708: 12" Hardwire Power Cord
NATLCB-708/BC: 6" Power Cord with Power Line Connector
NATLCB-TB707: Terminal Block for Tape-to-Tape
NATLCB-707: End-to-End Connector
NATLCB-703: 3" Linking Cable
NATLCB-706: 6" Linking Cable
NATLCB-718: 18" Linking Cable
NATLCB-736: 36" Linking Cable
NATLCB-772: 72" Linking Cable
NATLCB-L: L Connector
NATLCB-T: T Connector
NATLCB-X: X Connector

Channels:
NATL-C23: 4' Shallow Recessed Channel
NATL2-C23: 4' Shallow Recessed Channel
NATL-C24: 4' Shallow Channel
NATL2-C24: 4' Shallow Channel
NATL-C25: 4' Deep Recessed Channel
NATL2-C25: 4' Deep Recessed Channel
NATL-C26: 4' Deep Channel
NATL2-C26: 4' Deep Channel
NATL-C27: 4' J-Style Channel
NATL-C28: 4' Corner Channel
NATL2-C29: 4' Trimless Recessed Channel
NATLCB-709: Clear Mounting Clips

24V Drivers:
NATL-524W: 120V/24V 24W Plug-In Driver
NATL-545W: 120V/24V 45W Plug-In Driver
NATL-596W: 120V/24V 96W Plug-In Driver
NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver
NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver
NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver
NATLED-5040HW: 120V/24V 40W ELV Dimmable Driver
NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver
NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver
NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver
NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator
NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator
NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer
NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer

The post NUTP15 first appeared on Nora Lighting.

NUTP81

kevin.solano — Wed, 10 Jul 2024 19:13:16 +0000

24V Continuous High Output LED tape provides bright even illumination at 450 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4'. Optional accessories, channels, and drivers make Nora’s Continuous Hy-Brite LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications.

Features
· 24V system – requires Class 2 LED driver
· Field cuttable every 4' and connectable with accessories
· Roll includes: Tape light, power feed with DC connector, mounting clips and screws
· Easy to install with pre-applied adhesive tape or clips
· No soldering required

Length: 16' or 100'

Input Voltage: 24V

Lumens / Wattage: 450lm / 6.5W per foot

Color Temperature: 2700K, 3000K, or 4200K

Color Rendering Index: 90+ CRI

Power Cords:
NATLCFC-608/3A: 3" Hardwire Power Cord
NATLCFC-609/3A: 3" Power Cord with DC connector
NATLCFC-608/12A: 12" Hardwire Power Cord
NATLCFC-609/12A: 12" Power Cord with DC connector
NATLCFC-608/48A: 48" Hardwire Power Cord
NATLCFC-609/48A: 48" Power Cord with DC connector
NATLCFC-608/96A: 96" Hardwire Power Cord
NATLCFC-609/96A: 96" Power Cord with DC connector

Connectors:
NATLCFC-600A: End-to-End Connector
NATLCFC-603A: 3" Linking Cable
NATLCFC-606A: 6" Linking Cable
NATLCFC-612A: 12" Linking Cable
NATLCFC-624A: 24" Linking Cable
NATLCFC-648A: 48" Linking Cable
NATLCFC-672A: 72" Linking Cable
NATLCFC-696A: 96" Linking Cable

Channels:
NATL-C23: 4' Shallow Recessed Channel
NATL-C24: 4' Shallow Channel
NATL-C25: 4' Deep Recessed Channel
NATL-C26: 4' Deep Channel
NATL-C27: 4' J-Style Channel
NATL-C28: 4' Corner Channel
NATHR-680: 4' Channel without Lens
NATHR-685: Clear Mounting Clips

The post NUTP81 first appeared on Nora Lighting.

NUTP51

kevin.solano — Wed, 10 Jul 2024 18:32:46 +0000

24V Continuous Hy-Brite LED tape provides bright even illumination at 375 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4'. Optional accessories, channels, and drivers make Nora’s Continuous Hy-Brite LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications.

Length: 20' or 100'

Input Voltage: 24V

Lumens / Wattage: 375lm / 4.25W per foot

Color Temperature: 2700K, 3000K, or 4200K

Color Rendering Index: 90+ CRI

The post NUTP51 first appeared on Nora Lighting.

NUTP71

kevin.solano — Wed, 10 Jul 2024 14:29:40 +0000

24V Continuous Standard LED tape provides bright even illumination at 80 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4". Optional accessories, channels, and drivers make Nora's Continuous Standard LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications.

Features
· 24V system - requires Class 2 LED driver
· Field cuttable every 4" and connectable with accessories
· Roll includes: Tape light, power feed with DC connector, mounting clips and screws
· Easy to install with pre-applied adhesive tape or clips
· No soldering required

Length: 20' or 100'

Input Voltage: 24V

Lumens / Wattage: 80lm / 1.5W per foot

Color Temperature: 2700K, 3000K, or 4200K

Color Rendering Index: 90+ CRI

Power Cords:
NATLCFC-208/3A: 3" Hardwire Power Cord
NATLCFC-209/3A: 3" Power Cord with DC connector
NATLCFC-208/12A: 12" Hardwire Power Cord
NATLCFC-209/12A: 12" Power Cord with DC connector
NATLCFC-208/48A: 48" Hardwire Power Cord
NATLCFC-209/48A: 48" Power Cord with DC connector
NATLCFC-208/96A: 96" Hardwire Power Cord
NATLCFC-209/96A: 96" Power Cord with DC connector

Connectors:
NATLCFC-200A: End-to-End Connector
NATLCFC-203A: 3" Linking Cable
NATLCFC-206A: 6" Linking Cable
NATLCFC-212A: 12" Linking Cable
NATLCFC-224A: 24" Linking Cable
NATLCFC-248A: 48" Linking Cable
NATLCFC-272A: 72" Linking Cable
NATLCFC-296A: 96" Linking Cable

The post NUTP71 first appeared on Nora Lighting.